Name: High carbon graphite packing with four corners
Model: ZD-P1330
Name: High carbon graphite packing with four corners
Performance characteristics:
Carbon fiber corner wire reinforced graphite packing is made of high-quality high-strength carbon fiber reinforced by a special weaving process. The carbon fiber is wrapped in the four corners of the product, containing inorganic agglomeration agents that prevent gas and liquid leakage, as well as molybdenum based corrosion inhibitors that can prevent local corrosion of the valve stem. It is more wear-resistant, fluid resistant, and anti extrusion. This product has three times the overall performance improvement compared to ordinary graphite packing, while also increasing its compressive and extrusion resistance. According to customer requirements, it can be molded into a four corner high carbon graphite packing ring, such as ZD-RP1330
Equipment:
Suitable for packing sealing valves, kettles, and pumps with high temperature, high pressure, and low line speed.
Industry:
Recommended for use in petroleum equipment, power plants, chemical plants, steel mills, etc.
Media:
Except for a few strong oxidizing media, it can be used to seal almost all media such as hot water, high temperature, and high-pressure steam.
Product specification: 3 * 3mm -70 * 70mm; Special specifications or various non-standard products can be formulated according to customer requirements
Main technical parameters of four corner high carbon graphite packing:
Temperature -200-650 (℃) Water vapor
Pressure: Rotary pump 3.5MPa, reciprocating pump 25MPa, valve 30MPa
PH range 0-14
Linear speed 10m/s
Carbon fiber packing product type:
Carbon fiber packing name, model, density (g/cm3)
Carbon fiber packing
ZD-P1300 1.15-1.35
Medium carbon fiber packing
ZD-P1320
High carbon fiber graphite emulsion packing
ZD-P1310
Four corner high carbon graphite packing
ZD-P1330
High carbon fiber graphite core packing
ZD-P1340
Product name: Four corner carbon fiber reinforced graphite packing
Product model: GW4603
Product exhibitors: other brands
Attention index: 329
Product documentation: No relevant documentation
Brief Introduction
GW4603- Four corner carbon fiber reinforced graphite packing is made of flexible graphite as the basic material and mixed with high-quality carbon fiber as the four corner reinforced material, which has good chemical resistance, extrusion resistance, and erosion resistance. Technical parameters: Temperature: -250 ℃~650 ℃ (in steam)- 250 ℃~450 ℃ (in air) pressure: valve 350MPa; Rotating pump 3.5MPa; Reciprocating pump 20MPa Linear speed: 15m/s pH value: 0
Detailed Introduction to Carbon Fiber Reinforced Graphite Packing with Four Corners
GW4603- Four corner carbon fiber reinforced graphite packing
Made from flexible graphite as the basic material and mixed with high-quality carbon fiber as the four corner reinforcement material, it has good chemical resistance, extrusion resistance, and erosion resistance.
Technical parameters: Temperature: -250 ℃~650 ℃ (in steam)- 250 ℃~450 ℃ (in air)
Pressure: Valve 350MPa; Rotating pump 3.5MPa; Reciprocating pump 20MPa
Linear speed: 15m/s
PH value: 0-14 (excluding strong oxidants)
Suitable for: acids, solvents, water, strong corrosive agents, hot oil, steam, crude oil, synthetic crude oil.
Applied in: nuclear power plant external circulation valves, steam valves, oil valves, chemical valves, hot oil pumps, condensate pumps, boiler feedwater pumps, etc. in hydropower, metallurgy, petroleum, chemical, and electrical industries.
